Codeware

About Codeware

Codeware was founded in 1983 in Ontario, Canada. We opened our first U.S. office in 1993. We currently have offices in Sarasota, Florida and Austin, Texas. Codeware's founder, Les M. Bildy, P. Eng., has served as President since 1983.

Webinar – Meeting National Board Requirements with INSPECT

A brief overview of COMPRESS and INSPECT NBIC considerations - Re-rating or Relocating Equipment Design Margins Matter! - History of ASME Allowable Stress Re-rating Equipment Using INSPECT: NBIC Interpretation 98-14 Brittle Fracture and MDMT Inspection Schedules for Corrosion Benefits of Modeling Longitudinal Welds Webinar Reference Material Handouts from Webinar [...]

Webinar – Meeting National Board Requirements with INSPECT2016-12-19T15:36:11-05:00

Create Pressure Vessel Drawings in SOLIDWORKS

Create Pressure Vessel Drawings in SOLIDWORKS Webinar Topics Include: Importing the COMPRESS 3D model Viewing transferred properties and assembly configurations Using drawing templates, blocks and parametric tables Tips and tricks View All New Codeware Interface Features » To save even more time, nozzle Mates [...]

Create Pressure Vessel Drawings in SOLIDWORKS2017-12-12T09:10:12-05:00

Create Pressure Vessel Drawings in Inventor

Create Pressure Vessel Drawings in Inventor Webinar Topics Include: Codeware Interface Overview and Demonstration of Import Vessel/Exchanger Properties and Assembly Representations Drawing Templates, Sketch Symbols, Tables and Representations View All New Codeware Interface Features » To save even more time, nozzle Mates have been added [...]

Create Pressure Vessel Drawings in Inventor2018-03-09T14:21:51-05:00

Set Up Codeware Interface Templates in SOLIDWORKS

Set Up Codeware Interface Templates in SOLIDWORKS Codeware Interface 2015, Build 7510 for SOLIDWORKS includes templates for nozzle details, nozzle cut lists, U-Tube bend schedules and more. This video tutorial shows how to set up your ‘File Locations’ to point to these installed tables and templates in SOLIDWORKS. [...]

Set Up Codeware Interface Templates in SOLIDWORKS2017-05-02T13:38:57-04:00

Building Codes and ASME VIII-1 (UG-22)

Compliance With ASME VIII-1, Paragraph UG-22 Internal and external design pressures are not the only criteria used when designing pressure vessels. ASME VIII-1, paragraph UG-22, requires that all external loads acting on the pressure vessel be taken into account as well. These include forces and moments that arise from attached piping and equipment, the [...]

Building Codes and ASME VIII-1 (UG-22)2023-06-13T13:45:59-04:00

Rating Input Mode

Enter Component Thickness in Rating Input Mode Rating input mode in COMPRESS calculates the MAWP and minimum thickness while allowing you to input your existing geometry. Inputs are re-evaluated during the modeling process and updated as necessary to reflect applicable Code dependencies. In selected circumstances warnings and good engineering practice reminders are presented. [...]

Rating Input Mode2017-05-04T10:26:51-04:00

Design Input Mode

COMPRESS eliminates the time-consuming, manual iteration required by other software. In design mode COMPRESS selects sizes, thicknesses and ratings to meet Code requirements. Inputs are re-evaluated during the modeling process and updated as necessary to reflect applicable Code dependencies. In selected circumstances warnings and good engineering practice reminders are presented. Read About Rating Mode [...]

Design Input Mode2017-02-09T09:36:21-05:00

INSPECT Software Overview

INSPECT Software Overview INSPECT is an inspection data management, scheduling and fitness-for-service tool for pressure vessels, heat exchangers, piping and tanks. INSPECT: Tracks thickness surveys Generates inspection schedules Performs API 579-1 fitness-for-service assessments Produces required inspection reports The equipment’s governing condition monitoring location (CML) [...]

INSPECT Software Overview2017-09-01T11:04:24-04:00
Go to Top