| API 579-1/ASME® FFS-1 Calculations With Detailed Reports |
|
| Part 3 – Brittle Fracture, Levels 1 and 2, includes Minimum Safe Operating Temperature assessments and curves |
|
| Part 4 – General Metal Loss, Levels 1 and 2 |
|
| Part 5 – Local Metal Loss, Levels 1 and 2 (includes groove-like flaws) |
|
| Part 6 – Pitting Corrosion, Levels 1 and 2 |
|
| Supplemental loads for Part 5 and 6 |
|
| Combined Local Metal Loss and Pitting |
|
| Part 7 – Hydrogen Induced Cracking (HIC) and Hydrogen Blister assessments, Levels 1 and 2 |
|
| Part 8 – Out-Of-Roundness, both simplified Dmin/Dmax and multiple point Dmin/Dmax assessments |
|
| Part 9 – Crack-like Flaws, Levels 1 and 2 |
|
| Part 10 – Creep assessments, Levels 1 and 2 |
|
| Part 11 – Assessment of Fire Damage, Levels 1 and 2 |
|
| Part 12 – Dents, Gouges and Dent-Gouge Combinations, Levels 1 and 2 |
|
| Part 13 – Lamination assessments, Levels 1 and 2 |
|
| Part 14 – Fatigue assessments |
|
| Integrated 3D Inspection Data Management System (IDMS) |
|
| Automatic and manual inspection point (CML) placement |
|
| Attach images and related documentation to any CML |
|
| User defined CML data fields, as many as required, provide information tracking flexibility |
|
| Governing CML locations highlighted on 3D models |
|
| API 510, API 570 and API 653 calculations and reports |
|
| Minimum thickness calculations (tmin) |
|
| Determines inspection schedules (time based) |
|
| Quickly perform pressure vessel re-rating simulations |
|
| 3D plant modeling for Fixed Equipment Engineers |
|
| Vessel Wizard for fast vessel model creation |
|
| Intuitive user interface for quick piping layout creation |
|
| Ability to copy and paste piping components |
|
| Supporting ASME calculations and reports |
|
| ASME VIII-1 (Division 1) |
|
| ASME VIII-2 (Division 2), includes Class 1 and Class 2 vessels |
|
| ASME UHX heat exchanger calculations |
|
| Multiple ASME VIII Code Editions in one program (1995 – present) |
|
| Multiple ASME II-D Editions, including consideration of table notes (1995 – present) |
|
| API 570 and API RP 579/ASME FFS-1 piping tmin’s calculated using ASME B31.3 and ASME B31.4 rules |
|
| TEMA 7th, 8th, 9th & 10th Ed. heat exchanger calculations |
|
| NBIC R-1, R-2 Repair Forms |
|
| ASME A-1, A-2 Alteration Forms |
|
| Includes all COMPRESS features and options |
|
| Supports equipment design for new construction projects |
|
| Process piping inspection checklists with user-defined commentary |
|
| Associate API RP 970 Corrosion Control Documents with 3D process loops |
|
| Brittle fracture checks as recommended by The National Certified Pipe Welding Bureau (NCPWB) |
|
| Minimum pipe structural thickness check per API RP 574 |
|
| Short term, long term and user-defined corrosion rate trend analysis |
|
| Mechanical Integrity RAGAGEP comply with OSHA 1910.119(d)(3)(ii) and EPA Title 40 Part 68 |
|
| Tmin calculations use local CML joint efficiencies to extend vessel remaining life and inspection intervals |
|
| WRC-489 – Paragraph 4.2.8 Creep and Stress Rupture check |
|
| Documents undocumented pressure vessels |
|
| API 653 tank bottom patch plates (repair plates) |
|
|
API-579 Part 4, 5 and 6 for API-653 Storage Tanks
|
|
+1 (941) 927-2670 | sales@codeware.com