Codeware Webinars and Tutorials2021-07-13T09:25:40-04:00

Codeware On-Demand Webinars & Tutorials

What’s New in Codeware Interface 2021

Create Drawings Automatically With The Codeware Interface New features in Codeware Interface 2021 Build 8100 include: Multi-sheet drawing templates Performance improvement for Drafter3D Pressure Vessel weld map Watch the video below to see these new features in action: Download video (.mp4 165MB)

January 13th, 2021|Codeware Interface|

INSPECT API 579-1 FFS Software

Upgrade Your FFS Software Tools Are you looking for a better way to handle your Fitness-For-Service (FFS) activities?  INSPECT is the one program solution that covers pressure vessels, process piping and above ground storage tanks.  It also provides audit ready, professional looking reports. This short video will give you an overview of what INSPECT can do for you. Download [...]

October 16th, 2020|INSPECT, INSPECT Videos|

Heat Exchanger Mechanical Design in COMPRESS

Integrated Heat Exchanger Design and Fabrication Using COMPRESS Are you looking to expand your business by taking on heat exchanger work?  COMPRESS offers a Heat Exchanger add-on to help expand your capabilities by: Interfacing with Codeware's Shopfloor Section IX program to generate shop travelers and weld maps Automating drawing generation using the included Codeware Interface Supporting ASME UHX and TEMA Rules [...]

October 2nd, 2020|COMPRESS, COMPRESS Videos|

What’s New in COMPRESS 8010

July 6, 2020 - We're pleased to announce the release of COMPRESS 2020 Build 8010. Productivity enhancing new features include: UG-80 and UG-81 Out-of-Roundness Forming Tolerances Foundation Loads Summary Attaching ASME B16.9 Tees to nozzles Please watch the video below to see these new features in action. Download Video (132 MB) If you're [...]

July 6th, 2020|COMPRESS, COMPRESS Videos|

What’s New in INSPECT 8010

July 6, 2020 - We're pleased to announce the release of INSPECT 2020 Build 8010. Major new features include: Part 4 - Local Metal Loss on nozzles Part 8 Out-of-Roundness assessments Part 10 - Level 2 Creep Part 11 - Level 2 Fire Damage Pressure Relief Device (PRD) tracking Please watch the video below to [...]

July 6th, 2020|INSPECT, INSPECT Videos|

What’s New in Shopfloor 8010

July 6, 2020 - We're pleased to announce that the Shopfloor 2020 update has been released. Major new features include: Forms customization using templates Weld map drawing generation (SOLIDWORKS integration) WPS Applicability Check If your weld procedure software doesn't offer weld maps, it's time to have a look at Shopfloor.  See how Codeware's [...]

July 6th, 2020|Shopfloor|

Support Skirt Openings And Nozzle Extensions

Vertical pressure vessels usually need a support skirt opening to allow attachment to process piping.  COMPRESS saves hours by efficiently modeling these skirt openings and additional piping components. This short video shows how COMPRESS quickly models nozzles with elbow and pipe extensions. To see how Codeware's suite of products can benefit your organization we invite you to contact [...]

March 16th, 2020|COMPRESS, COMPRESS Videos|

The Shopfloor Document Turnover Package

Does it take you longer than it should to prepare document turnover packages for customers? With Shopfloor, you can drastically cut the time it takes to prepare a fabrication document turnover package. This short video will show you how Shopfloor automates the turnover package generation process and allows you to offer them to your customers, on-demand. To see [...]

March 16th, 2020|Shopfloor|

MSOT – Minimum Safe Operating Temperature Curves

Steel process equipment exposed to auto-refrigeration is at risk of failing catastrophically.  INSPECT helps mitigate this brittle fracture risk by determining equipment Minimum Safe Operating Temperature (MSOT) Curves and comparing them to a range of potential process scenarios.  These curves, also referred to as Minimum Pressurization Temperature (MPT) Curves, can be an important consideration when developing equipment integrity operating windows. This short video shows how INSPECT [...]

March 16th, 2020|INSPECT, INSPECT Videos|

Shopfloor and the AWS D1.1 Structural Steel Welding Code

Shopfloor now includes weld forms and Code checks that comply with the AWS D1.1 Structural Steel Welding Code. A notable feature is that full support for AWS D1.1 pre-qualified welding forms is provided.  For more information please see the video below: To see how Codeware's suite of products can benefit your organization we invite you to contact us [...]

February 5th, 2020|Shopfloor|

Heater Tube API 579 Part 10 Creep Assessments

One of INSPECT's most useful features is its ability to perform heater tube remaining life assessments per the creep rules of API 579 Part 10.  INSPECT provides comprehensive Level 2 creep calculations and detailed reports. It includes the MPC Project Omega, Larson-Miller Minimum, and Larson-Miller Average methods.  For more information on heater tube creep assessments in INSPECT please see the following video: [...]

February 5th, 2020|INSPECT, INSPECT Videos|

Request More Information

To see how our products can benefit your organization we invite you to contact us today.

Contact Us
Go to Top