If you’re using metric plate, you need to design using metric units. To accommodate jurisdictions that do not use U.S. Customary units, the ASME introduced metric design values throughout Section VIII as well as a Metric Edition of Section II, Part D. Converting a U.S. Customary design to metric at the end does not typically produce the same result as designing with metric units from start to finish.
COMPRESS makes it easy to create Code compliant designs in the system of units you require. When you design in metric units, COMPRESS:
Applies the metric provisions of Section VIII, Division 1
Uses the Metric Edition of Section II, Part D (allowable stress tables and physical material properties)
Allows you to work in either SI or MKS units. Country specific pressure units are available when MKS is selected
How does the ASME II-D (materials, metric) feature work?
The ability to work in metric units is included in each Standard COMPRESS license. COMPRESS allows you to easily change your system of units at any time.
Simply select Action > Set Mode Options > Units and check U.S. Customary, SI or MKS
Alternatively, right-click on the units displayed in the lower right corner of the COMPRESS design window
More About the Metric Provisions of the ASME Code
Recent ASME Code Addenda include certain figures, tables and material related requirements in both U.S. Customary and metric units. The material related requirements deal with issues including radiography, impact testing and minimum weld sizes. For instance, UCS-66 provides figures such as Fig. UCS-66.1 and its metric counterpart Fig. UCS-66.1M. Note that these metric versions reflect commercially available metric plate thicknesses. The ASME Code requires that consistent units be used when designing vessels and exchangers.